Hi all,
I had replaced the Rear Upper and Lower Control Arms with the after market type, [can't remember the brand, cheapies] only to find them chewed out after a few hundred miles. Reading from previous posts, there could have been a few reasons for this, incorrect weight on the vehicle when tightening or possibly spring positions not equally rotated to match each side. Also from the posts, most seem to recommend the Maximum Rear Lower Control Arms and Maximum have a remake of the Stock Uppers with rubber bushings. My uppers seem to be good, no signs of perished rubbers.
I rate my choices, as A - Maximum Lowers and use the Stock Uppers. Possible equal with A - Whiteline upper and Lowers, as these have a lifetime guarantee on the bushes, or C - Summit Racing, self branded, which have replacement bushes available.
Would anyone like to add their views?
My Mustangs home is Australia, is not punching out high horsepower, [a little over stock], and street drives only.
Connect With Us