Close



Results 1 to 12 of 12
  1. #1

    Default Throttle cable bracket air gap intake

    Search doesn't work and google not coming up with what I need. What throttle bracket is needed for an edelbrock air gap intake. This for my 84 lx 5.0 5spd with cruise

  2. #2

    Default

    After some research, there is a triangle shaped adapter plate that I'm missing that allows me to use the stock bracket. Does anyone know where I can buy this? If not I will have to fabricate it.

  3. #3
    FEP Senior Member
    Join Date
    Jan 2011
    Location
    Vancouver BC Canada
    Posts
    784

    Default

    The triangle bracket is available from Edelbrock, or you could make one yourself.
    1978 Fairmont 2 door sedan, 428CJ 4speed. 9.972ET@132.54mph. 1.29 60 foot
    Replaced the FE big block with my 331/4 speed in my Fairmont, best 10.24ET @128 MPH.
    1985 Mustang LX hatchback NHRA Stock Eliminator 302 4 speed best in legal trim 12.31@107 mph, but has gone 11.42@115 with aftermarket intake, carb, and iron Windsor Jr. heads.New for 2012! 331 cube SB Ford, AFR 185 heads, solid flat tappet cam, pump gas; 10.296ET@128.71 mph, 1.37 60 foot.
    1979 Zephyr Z7, all original 302 auto, 2nd owner.

  4. #4
    FEP Power Member 81coupe's Avatar
    Join Date
    Aug 2008
    Location
    Mount Washington, ky
    Posts
    1,064

    Default

    Yes, Sir. The triangle bracket is available from Edelbrock, or you could make one yourself. I still have a few laying around when I swapped to a Eddy RPM Intake on My latest build a few years ago. Call Edelebrock to see if they might send you one, or You could just make one yourself if You have the know how and Tools.
    1981 Mustang Coupe: Rebuilt 91/306, Ported E7's, TF Spring kit, E-303 Cam, RPM Intake, Eddy 1406 Carb, FMS Dual Roller Timing set, March UD pulleys, Summit LT Headers, Summit 2-1/2" Chambered Mufflers w/ 2-1/2" FlowTech H-Pipe/ Flowtubes & 2-1/2" LMR SS Tailpipes. C4 trans with 8.8/ 2.73 Rear.

  5. #5

    Default

    I will have to give them a call then. Thanks guys

  6. #6

    Default

    Am I missing something? I know I installed my Air Gap intake back in 07, but I don't remember needing a special bracket. Managed to bolt it on and make it work.

  7. #7
    FEP Power Member 81coupe's Avatar
    Join Date
    Aug 2008
    Location
    Mount Washington, ky
    Posts
    1,064

    Default

    The Adapter is only for the stock Throttle cable bracket/ Carb set up's, EFI not the same. Anyways. I also don't use this bracket on My Eddy RPM Carb and Intake by simply using the Lokar Throttle Cable Bracket mounted the the Eddy 1406 Carb.
    1981 Mustang Coupe: Rebuilt 91/306, Ported E7's, TF Spring kit, E-303 Cam, RPM Intake, Eddy 1406 Carb, FMS Dual Roller Timing set, March UD pulleys, Summit LT Headers, Summit 2-1/2" Chambered Mufflers w/ 2-1/2" FlowTech H-Pipe/ Flowtubes & 2-1/2" LMR SS Tailpipes. C4 trans with 8.8/ 2.73 Rear.

  8. #8

    Default

    Pm me if your willing to sell me that triangle bracket.

  9. #9

    Default

    PM me. I have one you can have. Just cover shipping.
    Jules
    '70 Mach I, Sold and Regret Every Second of it!!!
    '78 King Cobra, Sold
    '84-1/2 GT350 Vert. (My Latest Toy)

  10. #10

    Default

    Thanks! Pm sent
    84 LX Vert. 5.0 5speed canyon red on white
    99 cobra, electric green on medium parchment, vortech s-trim

  11. #11
    FEP Power Member 81coupe's Avatar
    Join Date
    Aug 2008
    Location
    Mount Washington, ky
    Posts
    1,064

    Default

    I looked but can't find the ones I had.
    1981 Mustang Coupe: Rebuilt 91/306, Ported E7's, TF Spring kit, E-303 Cam, RPM Intake, Eddy 1406 Carb, FMS Dual Roller Timing set, March UD pulleys, Summit LT Headers, Summit 2-1/2" Chambered Mufflers w/ 2-1/2" FlowTech H-Pipe/ Flowtubes & 2-1/2" LMR SS Tailpipes. C4 trans with 8.8/ 2.73 Rear.

  12. #12

    Default

    I had a similar problem on a performer 289, I just cut the stock bracket and bent it down to match up to the other hole and drilled a new hold to secure. Easy Peasy!

    Mike
    1982 GT 351W, retro hyd roller, ported Pro Comp heads, Tremec, M2300K brake kit, Recaros...needs paint!
    1984 LX 5.0 Vert *SOLD*
    1993 Cobra #3971 mostly stock *SOLD*
    1966 FFR Cobra replica 383W, Vic Jr heads, Vortech YS, TFS Box intake, 652rwhp, crazy fast!
    1987 GT in MM&FF May of 97 "Not Fade Away" white and purple. Sold 1999

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •