This is a postcard...I am away from the forum.
Posting elaborate stuff for something so simple isnt a good use of my time, but if it helps just someone here, I do have a motza of pictures from when I did my tow hitch design and trail fit on my 81.
iirc, Pre 1985, nothing on the short wheelbase Fox specialty coupes passenger side was turret puched for a passenger side hanger. So duplicating the driver side isn't possible without drilling or punching to fit the 86 hanger.
Easy way? You just grab some 3/8" rod all the exhaust guys use to make exhaust hangers, and pre curl it, and oxy acetaline or MIG weld it right to the chassis rail, (after having made the fuel tank safe from exploding). Then on the exhaust, same.
Then use a exhaust suspender donot/ grommet.
Sorry, I wont be re-rotating the photos, you have to recheck it in Photobucket because the accelerometer over rides the orintation unless you use edit, then back out, and recheck.....it takes ages, and aint got the time
Orange/red is passenger side.
IMG_6124_rotated
IMG_6127_rotated_driverside_exhaust hanger
IMG_6140_driverside_hanger
IMG_6141_passengerside_hanger
IMG_6164_driverside_exhaust_hanger
IMG_6165_passenger_side_exhaust_hanger
IMG_6241_rotated_passenger_side_hanger
Connect With Us