Conmech's 1984 Mustang GT350 2.3 Turbo
DougTX's 1986 Mustang GT Convertible 5.0
Forgotn's 1984 Mustang Predator GT302 #4S102
Mustang Marty's 1979 Mustang Coupe 5.0
Supercharged347's 1984 Mustang GT Supercharged 347
Trey
"I Don't build it hoping for your approval! I built it because it meets mine!"
"I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."
Mustangs Past: Too many to remember!
Current Mustangs:
1969 Mach 1
1979 Pace Car now 5.0/5 speed
1982 GT Stalled RestoModification
1984 SVO Still Waiting Restoration
1986 GT Under going Wide Body Conversion Currently
Current Capris:
1981 Capri Roller
1981 Capri Black Magic Roller Basket Case
1982 Capri RS 5.0/4spd T-top Full Restoration Stalled in TX
1984 Capri RS T-top Roller
1983-84 Gloy Racing Trans Am/IMSA Body Parts
Man this is a tough one and a full crowd this month.
Good luck guys!
Brock
1984 Mustang LX Convertible 3.8L V-6/Auto (SOLD)
1984 Mustang GT Hatchback 5.0 V-8/5 Speed
I'm an FEP Supporter and proud of it. Are you?
I'm a sucker for 84's so I picked one of the 84's, good luck guys, great variety this month.
Current Stangs+
84Gt (9W) T-top 347EFI
http://www.foureyedpride.com/content...984-Mustang-GT
84Gt(1E)Hardtop Turbo
http://www.foureyedpride.com/content...e-of-the-Month
Great cars this month!
Brian R. of Michigan
83 TBird 5.0
88 Ranger 2.3t
http://vb.foureyedpride.com/showthre...83-Tbird-build
Talking to a retired Sea Bee last night, so I have to go with Conmech's 84
Ray
86 Mustang LX 3.8 Convertible (bought new}
65 Galaxie 500 XL 390 auto
2A
I sent a PM and never heard back, so I will ask here. Anyone know what the wheels are on Forgotn's Mustang above? Any idea where I can find a dealer? My Fairmont has the same wheels, but my car is still in Oregon and will not get shipped to me until June. It has 5 lug rear wheels and 4 lug fronts. Going to do a 5 lug conversion on the front once it's her so I'm going to need a matching pair of front wheels. Pic below for attention....
Original Predator rims were Shelby rims with spinners. Be a bit tough to locate, and if yours are Shelbys, some of the Predator guys would love to have the 4 lugs if you change to 5 lug.
1983 Mustang G.T. No-option stripper- I like strippers.
5.0, GT40P heads, Comp Cams XE270HR-12 on 1.6 rockers, TFI spring kit, Weiand 174 blower, Holley 750 mechanical secondarys, Mishimoto radiator, Edelbrock street performer mechanical pump, BBK shortys, T-5 conversion, 8.8 rear, 3.73 gears, carbon fiber clutches, SS Machine lowers, Maximum Motorsport XL subframes, "B" springs.
Congratulations to Conmech and his 1984 Mustang GT350 2.3 Turbo as the winner of the May Ride of the Month!
I will send him the questionnaire and hopefully we can get the article taken care of and posted the first part of May.
Thanks to all the nominees and their cars, we had a great selection of unique and cool cars this month!
Trey
"I Don't build it hoping for your approval! I built it because it meets mine!"
"I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."
Mustangs Past: Too many to remember!
Current Mustangs:
1969 Mach 1
1979 Pace Car now 5.0/5 speed
1982 GT Stalled RestoModification
1984 SVO Still Waiting Restoration
1986 GT Under going Wide Body Conversion Currently
Current Capris:
1981 Capri Roller
1981 Capri Black Magic Roller Basket Case
1982 Capri RS 5.0/4spd T-top Full Restoration Stalled in TX
1984 Capri RS T-top Roller
1983-84 Gloy Racing Trans Am/IMSA Body Parts
I thought I Sent a PM response. I'm not sure why it did not go through but I did type a well though out, and highly educated response. Apparently I was not smart enough to hit the send button. Sorry about that. I think you scored big time on the wheels as they are worth some money to the Predator guys. They are VERY hard to come by but there are a few people on this forum that might be interested in taking them off your hands.
Last edited by forgotn; 05-02-2017 at 08:34 AM.
1984 Predator GT302 #4S0102 - Complete rotisserie and put back to stock
1979 Pace Car - 306, H/C/I, T5, 8.8, 3.73 - 288 RWHP
1993 GT Vert - PROCHARGER P1SC, H/C/I, Built AODE, 3.73 - 421RWHP / 405 RWTQ - SOLD
Very common and easy to get Performance wheels in 4 by 108mm. E35 offset IIRC.
Old Mini Lite copies.
Saab 900, MGB GT, Pinto, UK/AU Ford Escort/Cortina replacement alloy wheel. Its a great product.
It has a very thick hub center. AS 1338 alloy wheels have insufficient thread with the stock European/UK/Australian Cortina wheel studs. They are way to short for safety, and are "shanked", not acorn profile. Good US Fox TRX or Turbine hub nuts and US studs, not a problem.
Would I use them? No, but they are used in Historic circuit racers with 110% safety in Australia.
Had them in my Fox like Australian 1980 Ford Cortina
You have to make sure your wheel studs are the correct depth, Dr Matt, we just about killed a young mama prammin' her little one when towing this wagon home one weekend.
More wheel arch issues on the British stuff, thats why I love US Mustang II's and Foxes, proper space for bigger wheels.
See https://fordsix.com/viewtopic.php?t=35033
About Respect https://www.youtube.com/watch?v=2bk9WG8KWW0
X's Album http://vb.foureyedpride.com/album.php?albumid=2922
Oz JPS Stang http://www.nzmustang.com/Images/Hist...cecars/jps.htm
4V (A)US Race V8's https://www.youtube.com/watch?v=Tqk18A-ibjA
ITZOLD 81 Fox http://vb.foureyedpride.com/showthre...-fun-and-games
6V i6's @ http://www.xecltd.info/?rd=10 ; AWD i6's @ http://www.apetracing.co.nz/
113 mph 84 5.0 at Amaroo https://www.youtube.com/watch?v=iTezv3Pzdls&t=8s
Techno KCM Loop Out: Severed Heads 1m³ Angels 1985 https://youtu.be/Wll6G1KpLqQ
Future Shock https://youtu.be/rDKGkWU0lWQ
Connect With Us