So as many of you know, I had been up and down about selling or fixing up my Hertz SVO, well after a few months of driving the car, I have feel head of heels for this car. I'd rather die than sell it, I love it so much, they way it curves and everybody compliments this car everywhere I go in it. After several hours behind the wheel I have come to appreciate and understand why people hold these cars so near and dear to their heart. I have done quite alot of cosmetic work to the car since I got it and although i am not much of a mechanic I have worked hard to learn and have done alot of it myself, which makes me even prouder of the car as it comes along. Here is where I need some input, I have these parts in my cart right now and I'm getting ready to pull the trigger and just wanted to see if you guys felt this would be a good solid route towards my HP goal and also tasteful in nature. So here is my parts list. Boport Stage 3 upper and lower intake manifold's ported, polished and gutted with MAF from SN95, PE computer from 86 SVO, 42lb EV1 Bosch Injectors, Stainless Steel Header and 3" downpipe full length to CAT. I have chose to put the car in the 350 to 400 RWHP range. I do want to keep the car streetable and fun, I plan to keep the exterior completely stock in appearance but I wanted it to run with the big boys and have a much stronger exit out of corners. If you guys can give me a general idea where this would put me, I would be thankful! I chose these add-ons as it would keep it very factory looking under the hood with the exception of the stainless headers.
Connect With Us