Bunch of performance parts, 140 mph cluster, edelbrock, pro 5.0, comp cams, ram, etc

[cb84capri]

Up for sale are used parts from my car that I no longer have any use for.

Edelbrock Performer RPM Airgap intake manifold for 302, slight porting and gasket match, painted engine aluminum, nice shape - SOLD!

Pro 5.0 short throw shifter for Mustang T5 and T45 transmissions, nice shape. - SOLD!

Professional Products 90007 sfi approved harmonic balancer for 81+ 50oz sbf 5.0 with 4 bolt crank pulley adapter for fox serpentine setup. Was repainted due to flaking, paint isn't as great as it is in pictures. Weight could be removed for internally balanced crank, several 0 lines etched in body for various timing pointers on sbf apps - SOLD!

Ram 1525 sfi approved 50oz 157 teeth flywheel for 81+ 5.0 sbf. Bedded to a Centerforce DF disc, nice condition - $100 compared to $289 new at Summit






Comp Cams 31-334-4 solid lifter flat tappet cam, Comp solid direct lube lifters, and Comp pushrods from 5.0 sbf. Cam is .528/.528 lift, 236/236 @ .050, 110lsa. Lifters got mixed up but it shouldn't matter with these. Religiously ran with Valvoline VR1. - $100 for all






Not sure the origin of this new timing set, but the gears have E3 Ford engineering code. It appears to be a new Ford timing set. I'l include 2 piece eccentric and bolt, cam plate bolts, dowel and this piece I pulled off a fuel injected motor that was in place of the pump eccentric - SOLD!

Stock v8 power steering pulley, and v8 C.A.T. water pump under drive pulley for fox - $10 each CRANK PULLEY SOLD!




154-3601 sbf 5.0 head bolts, used a few times - SOLD!

Cale

[cb84capri]

Ford Motorsport SVO 140mph speedometer and 8k tach in completer green circuit board cluster. - SOLD!

Edelbrock Performer series 1406 600cfm elecrtic choke aluminum four barrel carburetor. Worked great when removed, may need rebuild. The adapter to the side is for a Ford automatic kickdown, may not all be there never ran the car automatic - $100 compared to $335 new at Summit.





Carter 625cfm 9637S aluminum four barrel carburetor, the original afb. This has the Ford style linkage on it I bought this years ago and rebuilt it, but never used it. Uses the same parts as the Edelbrock Performer series, has an airhorn like an Edelbrock 1400 carb. It should be good to go and has been stored in a box, but I rebuilt this a few years ago so you might need to clean it out a little. These have been discontinued for years. - $125




Prices listed are for the parts only, buyer pays actual shipping. I can do paypal or certified money order from a legit bank, or cash in person. Might even be interested in trade for foxbody suspension stuff, or 82-92 Camaro parts.

Thanks for checking out my ad,
Cale

[cb84capri]

More stuff!

5 lug 28 spline fox length axles from Aerostar vans. Were in my car for a few years, straight - $60


84-86 gauge cluster, good shape, 27xxx miles showing. 6k 4-6-8 cylinder tach - SOLD!

K&N replacement filter. Fits 83-85 4V dual snorkel air cleaner. Some slight shrinkage but stretches out again when tightened down - $20


Cale

[slomont]

I'll take the head bolts.

Pm me price shipped to 23456 with your PayPal address. Thanks

[cb84capri]

I'll take the head bolts.

Pm me price shipped to 23456 with your PayPal address. Thanks

Will do!

Thanks,
Cale

[tiretread]

This guys ships fast! Thanks Cale. Look forward to getting this on my engine.

[cb84capri]

I hope you like the intake manifold, Russ! More stuff added in post 3! I have some dash plates too if anyone is interested.

Cale

[dwbarnes]

I'm interested in the 140 mph instrument cluster. PM Sent.

[mustangs4me]

Nice stuff Cale!

[cb84capri]

Thanks Scott!

Cale

[cb84capri]

Ad updated! If you see it, I still have it. I accept reasonable offers!

Cale

[cb84capri]

Sorry guys if your PMs didn't go through. My inbox filled up again though it shouldn't have because I should have supporter status on here now and get reasonable pm storage space like I do on countless other forums I belong to that I don't contribute money to. Is the site owner asleep at the wheel? I guess I take getting paid for things more seriously?

Cale

[FoxFords&FFR's]

Any pics of the 140 cluster, I only saw it listed in the title... Thanks

Mike

[cb84capri]

Sorry Mike I sold it. I just removed it from the thread title.

Cale

[cb84capri]

I still have some stuff to sell!

Cale

[weber_seth]

Where are you located?


Sent from my iPhone using Tapatalk

[klutch81]

are the axles $60 shipped? if so i might be interested.

[cb84capri]

No they aren't because unfortunately shipping these to states like California from here is like $60 in itself. If you want to send me your zip I can see what I can do. I already have them boxed up. I got a price for a guy in PA for around $30 who told me he was going to buy them, then dropped off the face of the Earth.

Thanks,
Cale