Close



Results 1 to 6 of 6
  1. #1
    FEP Power Member dagenham's Avatar
    Join Date
    Jul 2016
    Location
    Duncannon PA
    Posts
    1,047

    Default Modified 2.3 cylinder head

    I have a cylinder head from a 2.3 I built years ago. It is gasket match ported with big valves and a fairly big cam. I don't have the cam card anymore so I don't remember the specs. It was on a n/a engine. It will need a new set of valve seals. It has been off the engine for a long time. It also has one heli coil on the exhaust side. This head cost me well over a $1000 dollars to build 20 plus years ago. If you can find a good 2.3 head and have all the work done today it will probably cost twice that.
    I would like to get $600 for it, plus shipping.Name:  photo 1 - Copy.JPG
Views: 326
Size:  118.6 KBName:  photo 1.JPG
Views: 334
Size:  118.0 KBName:  photo 2 - Copy (2).JPG
Views: 333
Size:  106.0 KBName:  photo 2 - Copy.JPG
Views: 330
Size:  105.0 KBName:  photo 3 - Copy (2).JPG
Views: 333
Size:  111.8 KB
    I have a bunch more pics if interested. And no the valve cover DOES NOT come with it.
    Last edited by dagenham; 01-08-2017 at 12:08 PM.

  2. #2
    FEP Power Member dagenham's Avatar
    Join Date
    Jul 2016
    Location
    Duncannon PA
    Posts
    1,047

    Default

    bump bump

  3. #3
    FEP Power Member dagenham's Avatar
    Join Date
    Jul 2016
    Location
    Duncannon PA
    Posts
    1,047

    Default

    I still have this for sale if interested hit me up with a reasonable offer and we'll talk.

  4. #4

    Default

    Is this head milled down?
    __________________________________________________ __________________________________
    1986 Mustang GT - 45,000 Miles
    Off-Road H-Pipe, Flowmaster 40's, MM Adjustable RLCA's, FRPP UCA's, BMR 1" Rear Lowering Springs,
    UPR Front Coilovers, 5 Lug Conversion, O.E. Racing Bullitt Wheels

  5. #5
    FEP Power Member dagenham's Avatar
    Join Date
    Jul 2016
    Location
    Duncannon PA
    Posts
    1,047

    Default

    Iirc only a few thousandths to make sure it was true. Certainly nothing that would raise the compression on a stock piston setup

  6. #6

    Default

    Thanks... I was hoping it was!
    __________________________________________________ __________________________________
    1986 Mustang GT - 45,000 Miles
    Off-Road H-Pipe, Flowmaster 40's, MM Adjustable RLCA's, FRPP UCA's, BMR 1" Rear Lowering Springs,
    UPR Front Coilovers, 5 Lug Conversion, O.E. Racing Bullitt Wheels

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •