Close



Results 1 to 6 of 6

Threaded View

  1. #1
    FEP Senior Member dagenham's Avatar
    Join Date
    Jul 2016
    Location
    Duncannon PA
    Posts
    780

    Default Modified 2.3 cylinder head

    I have a cylinder head from a 2.3 I built years ago. It is gasket match ported with big valves and a fairly big cam. I don't have the cam card anymore so I don't remember the specs. It was on a n/a engine. It will need a new set of valve seals. It has been off the engine for a long time. It also has one heli coil on the exhaust side. This head cost me well over a $1000 dollars to build 20 plus years ago. If you can find a good 2.3 head and have all the work done today it will probably cost twice that.
    I would like to get $600 for it, plus shipping.Name:  photo 1 - Copy.JPG
Views: 240
Size:  118.6 KBName:  photo 1.JPG
Views: 241
Size:  118.0 KBName:  photo 2 - Copy (2).JPG
Views: 242
Size:  106.0 KBName:  photo 2 - Copy.JPG
Views: 241
Size:  105.0 KBName:  photo 3 - Copy (2).JPG
Views: 240
Size:  111.8 KB
    I have a bunch more pics if interested. And no the valve cover DOES NOT come with it.
    Last edited by dagenham; 01-08-2017 at 11:08 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •