What did you do to your four eye today? 2017

[tonysilver82]

repolish my trx wheels

[JTurbo]

Looks very nice Tony!!!

[tonysilver82]

Looks very nice Tony!!!

Thanks need to get off my tail and put the rest of my molding on

[JTurbo]

Thanks need to get off my tail and put the rest of my molding on

I hear ya, I need to get off my tail and finish my 82. I'm about 90% done at this point, but I got burnt out (again)....

[wilsst]

repolish my trx wheels

How do you get your wheels so shiney??

[tonysilver82]

How do you get your wheels so shiney??

alot of sanding and polishing about 4 hours per wheel

[HurricaneJesus]

Spent a good while yesterday (or was it Saturday?) fiddling trying to get rid of a 2k RPM stumble. I'm sure my neighbors loved it.

[HurricaneJesus]

Here's something I spotted at the Classic 24 in Daytona Friday I figured you guys would get a kick out of.

Under the hood of a priceless Jag racecar.

[84StangSVT]

repolish my trx wheels

HOLY SCHMOLY! Those are amazing and I can only imagine the work involved to get them that way!

You might wanna polish the exhaust tips to match.

[84StangSVT]

Nothing. I found out today that I might not see the house before X-Mas.

Why can't I hit the lottery?

[83gtstang]

I'm in the process of dropping my transmission to do a throw-out bearing change. Have everything but the shifter off to drop the transmission. Has anyone done this with the bell housing on the block still?

[webestang]

Drove the 85 the other day....timing still a bit off, ran ruff, needs adjusting. With winter coming and no heat might have to wait till spring.....

[Walking-Tall]

Spent a good while yesterday (or was it Saturday?) fiddling trying to get rid of a 2k RPM stumble. I'm sure my neighbors loved it.

Part throttle, WOT? No load in the driveway, driving down the street, aggressively driving down the street?

[HurricaneJesus]

Part throttle, WOT? No load in the driveway, driving down the street, aggressively driving down the street?

Part throttle. I backed out the vacuum advance maybe 2 1/2 turns and completely started over with the carb idle screws. Seems mostly gone (although I might just be hyper-sensitive to it).
Drove her to work today. It's Florida cold and I have no heat and janky weatherstripping. Smile on my face the whole way, baby.

[Basin Motorsports]

I made a little more progress on the widebody kit this weekend (on Saturday). I measured where the fender needed to be cut, did a little surgery, then mounted the flare. I need to finish up stripping the bodyside residue molding off, then paint the lower half of the door in black.

Attachment 116883

Attachment 116884

[dtmilsap]

Received from my engine builder today what I believe to be cam card. Going to post up for opinions.

Sent from my SAMSUNG-SM-G900A using Tapatalk

[83GTJIM]

Sold it....sad, but other projects demand the space.

Attachment 116918

[HurricaneJesus]

Tried to find some bolts or set screws to use as thermactor plugs. No luck at Home Depot...I'll try Lowes later.

[HurricaneJesus]

Tried to find some bolts or set screws to use as thermactor plugs. No luck at Home Depot...I'll try Lowes later.

Shoulda known better. Fail. Maybe I'll try Ace...or just order some.

[Walking-Tall]

Tried to find some bolts or set screws to use as thermactor plugs. No luck at Home Depot...I'll try Lowes later.

I knew I saw what I think you're talking about, in the oddest place, under "NEW CARBURETOR SCREW KIT 26-172" at AllState Carb, lol...



"This is a screw kit.

FORD HEAD AIR PLUG KIT SysteMAX; Cylinder Head Air Passage Plug Kit. Fits many Fords, Lincolns, and more from 1985 to 1993."

Five bucks!

Link ---> http://allcarbs.com/detail.php?pid=1...&ctgn=66&stt=5

[tonysilver82]

drove it some this week to work and back

[Mikestang]

drove it some this week to work and back

Sweet ride

[onetrackrider]

Tried to find some bolts or set screws to use as thermactor plugs. No luck at Home Depot...I'll try Lowes later.

Read this: http://vb.foureyedpride.com/showthre...ctor+plugs#top

[DadBox]

What heads, compression ratio? Do you have a build thread?

Received from my engine builder today what I believe to be cam card. Going to post up for opinions.

Sent from my SAMSUNG-SM-G900A using Tapatalk

[HurricaneJesus]

Read this: http://vb.foureyedpride.com/showthre...ctor+plugs#top

Yep, can't find those 5/8-11 3/4 bolts or set screws anywhere. The Fastenal store apparently has 'em so hopefully they're open Friday.