Close



Results 1 to 2 of 2
  1. #1
    FEP Member toaster's Avatar
    Join Date
    Feb 2006
    Location
    Los Lunas, New Mexico
    Posts
    131

    Default Cruise control cable attachment

    So got around to working on the 79 today. I cannot use the little plastic clip that holds the cruise chain to the throttle cable because it hits the bolt for the jegs return spring braket kit where it attaches. http://www.jegs.com/i/JEGS-Performan...oductId=752802

    I was thinking I could Ghetto rig it and just wire it to the throttle cable. My other thought was use a different return spring setup but they all seem to attach in the same spot with a bolt. Any other ideas.

  2. #2
    FEP Member toaster's Avatar
    Join Date
    Feb 2006
    Location
    Los Lunas, New Mexico
    Posts
    131

    Default

    After searching got this idea from an aftermarket setup. Any thoughts?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •