You're lucky. On an F/Z the bottom of the window just hangs out there in no man's land, so if you don't have absolutely perfect window bracket bushings (which I don't), they are free to move around.
Brad
'79 Mercury Zephyr ES 5.0L GT40 EFI, T-5
'17 Ford Focus ST
'14 Ford Fusion SE Manual
finally fixed the passenger side. One metal tab was fully exposed. A small piece of felt and now both doors are quiet.
Its the little things that make me smile.
Attachment 88278
HAD
'82 GT monochromatic (red)...black cloth
HAVE
'85 GT vert two tone (white on charcoal)...white leather
'00 F350 two tone (white on silver)...gray cloth
'00 Excursion Limited two tone (white on tan)...tan leather...wifes ride
'08 Taurus Limited ice blue...tan leather...daughter ride
'08 Edge Limited white sand tri-coat metallic...tan leather...other daughters ride
Glad you got it fixed and I was thinking it could have been those tabs as my vert has the same issue where it is missing them and the rattle is annoying.
bwguardian, yes the inner door panel has to come off and the tabs are about a 1/4" or so down on the inner door side. There are 3 of them and with the window down it's not that bad to get to them. If by chance the OP has already buttoned up his doors, I will be more than happy to take pictures when I get home and post them up so all of us vert guys can see them as my doors are still torn apart.
Brock
1984 Mustang LX Convertible 3.8L V-6/Auto (SOLD)
1984 Mustang GT Hatchback 5.0 V-8/5 Speed
I'm an FEP Supporter and proud of it. Are you?
Let's add a little to this thread! My 84 vert does have the door window channel guide, part 21572, as seen in the below picture. It is in both doors.
Attachment 88314
Last edited by 84StangSVT; 07-29-2015 at 07:02 AM.
Brock
1984 Mustang LX Convertible 3.8L V-6/Auto (SOLD)
1984 Mustang GT Hatchback 5.0 V-8/5 Speed
I'm an FEP Supporter and proud of it. Are you?
I was a ways off on my guesstimate measurements. The felt lined tabs are as follows measured down from the inner door rail where the panel/dew wipe clips.....front, 2 3/4", middle 1" and rear 2 1/4". The top of the guides are easily accessible from the top and the bottoms are easily accessible from the large hole in the middle of the inner door which should make installing new felt a breeze.
Attachment 88315
Attachment 88316
Attachment 88317
Attachment 88318
Last edited by 84StangSVT; 07-29-2015 at 07:11 AM.
Brock
1984 Mustang LX Convertible 3.8L V-6/Auto (SOLD)
1984 Mustang GT Hatchback 5.0 V-8/5 Speed
I'm an FEP Supporter and proud of it. Are you?
Connect With Us