Close



Page 12 of 12 FirstFirst ... 2101112
Results 276 to 294 of 294
  1. #276
    FEP Super Member xctasy's Avatar
    Join Date
    Jun 2012
    Location
    Dunedin 9011, New Zealand, South Pacific
    Posts
    2,610

    Default

    1158's are my all time faves...first of all, they were born 220/55 390 on the Thunderbird, then stayed that way for 1983 on the CC Mercury Capri





    Fords biggest mistake was not going 415 when everyone else was...but that was because law emforcement said yes to 351 LTD's and Mustang 5.0 Notches....none of them had the 415 wheels, as they had to be steel to cope with mounting curbs at 80 mph.

    I can't see how a set of 240/55 vr 415's with steel rims on a 165 HP 5.8 Slab-Sided Yawn Fest wouldn't have been English for impressionnant. A 3 star Michelin rating from me...







    Ah well. Its just tires and wheels.

  2. #277

    Default

    Big update guys, I'm done with the prep for good ! Now it's just color, here's the first parts painted black :






    I then masked them off, and applied a thin coat of white primer where I didn't want black since I'm afraid it could show through under the basecoat.

  3. #278

    Default

    And finally, the blue ! What a striking color So far from the dull white that it was originally painted









    Now I have to get the brakes parts reinstalled, the engine back in, all the body back together, and I will proceed with the exterior paint !

  4. #279
    FEP Super Member JTurbo's Avatar
    Join Date
    Jan 2006
    Location
    Western MA
    Posts
    5,624

    Default

    Looks very nice. I like the color choice. Can't wait to see more!
    1979 Indy Pace Car Mustang 302 / 5spd
    1982 Mustang GT T-Top 302 / 4spd
    1986 SVO Mustang - 1C

  5. #280

    Default

    Very nice!

  6. #281

    Default

    I really like that color, can't wait to see the body shot.

  7. #282

    Default

    There it is finally ! Not perfect but I think it looks terrific in this color :










    Now I need to reassemble it, sand and polish the clear !

  8. #283
    FEP Supporter 82GTforME's Avatar
    Join Date
    Feb 2013
    Location
    Western Canada
    Posts
    4,111
    Blog Entries
    1

    Default

    That looks great!! Is that a painted on stripe down the side? Can you show it better? I'm really looking forward to seeing it together now.

    Is it recommended to do the black first on the bumper covers before the color and clear? Or is it just personal preference?
    Quote Originally Posted by Travis T View Post
    I think this is my favorite car on the site right now.
    Quote Originally Posted by BLUECRAPI
    This is the best thread on the internet.
    Darran
    1982-1C (Black) T-Top GT RestoMod:http://vb.foureyedpride.com/showthre...he-Road-Thread
    1986-9L (Oxford White) SVO: http://vb.foureyedpride.com/showthre...d-did-1986-SVO
    1979 (85:Tangerine) Coupe (my son's): http://vb.foureyedpride.com/showthre...gerine-Machine
    1979 (3F:Light Medium Blue) Coupe (one day to be my other son's!) http://vb.foureyedpride.com/showthre...other-79-Coupe!

  9. #284

    Default

    Great work

  10. #285

    Default

    Thanks ! Yes the stripes are painted, didn't want to buy the decals. The shipping is too expensive for such a small package (I had the experience with the decals of my Trans Am). It was much cheaper to just buy 1L of Ford Frozen White paint, mix it with the blue and paint them before applying the entire base :


    I don't know if it's recommended to paint the black first or not, but this is how it was made at the factory. All parts had a black primer applied before paint.

  11. #286

    Default

    I'm looking forward to seeing the reassembled pictures. You've put a lot of work into your mustangs, it's got to be satisfying to see this one painted.

  12. #287

    Default

    Oh yes, very !

    I will have to repaint the hood though, I'm not sure what went wrong in the base coat. Not enough air or not enough thinner. It looks rough and it's a bit cloudy. So it doesn't look good. I've sanded the whole surface with 600 grit, I'll do it with 1000 next and paint tomorrow.
    I'm surprised by this clear coat, it's a HS clear and dried very quick. I could cut and buff two days after.

  13. #288

    Default

    Quote Originally Posted by SuperDuty455 View Post
    Oh yes, very !

    I will have to repaint the hood though, I'm not sure what went wrong in the base coat. Not enough air or not enough thinner. It looks rough and it's a bit cloudy. So it doesn't look good. I've sanded the whole surface with 600 grit, I'll do it with 1000 next and paint tomorrow.
    I'm surprised by this clear coat, it's a HS clear and dried very quick. I could cut and buff two days after.
    What paint line are you using?

  14. #289

    Default

    The brand is T4W, it appears to be from Poland. I've been using APP brand from Poland previously and I've been very happy with it.

    I want to glue the rear window back, and I was thinking about using Butyl since it's much easier to apply than windshield glue. But it's much more expensive than I thought. What is the appropriate diameter that I should use ?
    Or is there a windshield glue that would be easier to apply ? I had a lot of trouble applying the glue for the windshield of my Trans Am, a special tool is required.

  15. #290

    Default

    Car is now mostly reassembled, I still need to secure the upper door trims. Only problem is I can't reuse the little plastic things that go into each hole, the clips are fine but the holes thing desintegrate when I try to remove them. Any idea where I could find them ?

    Also, any tips on how to remove the foam tape remains on the body side moldings ? That stuff is strong.

    I'll glue the rear window soon, interior is all back together, I need to finish the cut and buff, and install new parts/gaskets before it's back on the road !







  16. #291

    Default

    Jeez that's pretty!

    If you can soak the mouldings in wax and grease remover for a while, that'll soften up the tape enough to get it off the moulding.

  17. #292
    FEP Supporter 82GTforME's Avatar
    Join Date
    Feb 2013
    Location
    Western Canada
    Posts
    4,111
    Blog Entries
    1

    Default

    Quote Originally Posted by SuperDuty455 View Post
    Car is now mostly reassembled, I still need to secure the upper door trims. Only problem is I can't reuse the little plastic things that go into each hole, the clips are fine but the holes thing desintegrate when I try to remove them. Any idea where I could find them ?
    Your car is looking fantastic!! I can't wait to see the final product!!

    As for the parts you need to reattach the door moulding; you are in luck as they are available through Late Model Restoration

    They are called barrel nuts. There is bunch of info here for your reading pleasure: http://vb.foureyedpride.com/showthre...ghlight=barrel

    If you just want the part, go here:

    http://www.foxresto.com/product-p/2279008.htm

    Quote Originally Posted by Travis T View Post
    I think this is my favorite car on the site right now.
    Quote Originally Posted by BLUECRAPI
    This is the best thread on the internet.
    Darran
    1982-1C (Black) T-Top GT RestoMod:http://vb.foureyedpride.com/showthre...he-Road-Thread
    1986-9L (Oxford White) SVO: http://vb.foureyedpride.com/showthre...d-did-1986-SVO
    1979 (85:Tangerine) Coupe (my son's): http://vb.foureyedpride.com/showthre...gerine-Machine
    1979 (3F:Light Medium Blue) Coupe (one day to be my other son's!) http://vb.foureyedpride.com/showthre...other-79-Coupe!

  18. #293

    Default

    Looks really nice, great work!
    -Randy
    '83 Mustang GL notchback - 3.8 C5
    '92 Mustang LX hatchback - 2.3 T5 (2.3t soon)

  19. #294
    FEP Super Member IDMooseMan's Avatar
    Join Date
    Oct 2011
    Location
    Nampa ID 83686
    Posts
    4,878

    Default

    Looks amazing. Fantastic progress. I love the way that blue turned out.
    Craig "IDMooseMan" Peters
    1979 Mustang Ghia Notchback, 2.3L, Holley 5200, 4-spd, 3.08:1 7.5" diff, A/C, PS, PB, AM/FM/8-Track, Sunroof, Rear Defroster
    USAF SSgt 1983 - 1992; Co-Founder and Vice President, Omega Delta Sigma, ID-A 2/2015
    To those that serve and have served, "Thank You", to those that haven't, "You're Welcome"
    2.3L Horsepower Potential Thread
    Buyer/Seller Experience Link
    Build Thread
    The Four-Eyed Game - 2017 Version

Page 12 of 12 FirstFirst ... 2101112

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •