Sand Biege Interior parts...door panels, console, ect.
Door panels. $80/pr. - missing map pocket - SOLD
Console. $75 - has a small crack on the back & the arm rest pad is rough.
Map light. $30
Lower fuse panel cover. $30
Door pull. $10
1 visor with 2 visor clips. $20
All prices plus shipping. PM me if interested.
Mike
Last edited by MIKE'SVO86; 07-06-2015 at 10:32 PM.
Bleed Ford Blue! '84 Grabber Orange SVO, '88 Saleen 1 of 4 w/Automatic, '89 Steeda, '71 DeTomaso Pantera GT5 Wide Body EFI 4.6 DOHC...soon to be a Gen3 Coyote and some Old Ford Muscle w/ BB power. 1.21 Jigawatts!!?? PETRO EXPRESS=CITGO=BOYCOTT!
State of Illinois - Taxation without Representation!
those panels look nice
Are those manual windows. .
They look manual windows.
Yep, manual windows. There is warpage on the bottom of the DS. Factory insulation still attached to the back of each panel.
Bleed Ford Blue! '84 Grabber Orange SVO, '88 Saleen 1 of 4 w/Automatic, '89 Steeda, '71 DeTomaso Pantera GT5 Wide Body EFI 4.6 DOHC...soon to be a Gen3 Coyote and some Old Ford Muscle w/ BB power. 1.21 Jigawatts!!?? PETRO EXPRESS=CITGO=BOYCOTT!
State of Illinois - Taxation without Representation!
Manual windows is not a concern. They are pre stamped on the back for the power window hole. It's in the same spot, just a different cut out. All you have to do is flip it over and knock out the panel for the power switch. I have pictures of said conversion if anyone doubts it.
Liberty once lost is lost forever.
John Adams
July 7, 1775
Message sent on console
More pics of the door panels.
Bleed Ford Blue! '84 Grabber Orange SVO, '88 Saleen 1 of 4 w/Automatic, '89 Steeda, '71 DeTomaso Pantera GT5 Wide Body EFI 4.6 DOHC...soon to be a Gen3 Coyote and some Old Ford Muscle w/ BB power. 1.21 Jigawatts!!?? PETRO EXPRESS=CITGO=BOYCOTT!
State of Illinois - Taxation without Representation!
Thr problem isnt manual to power its power to manual? Do you have a right up on how to fill in the cut out after its converted? Im after manual window door panels. Just gotta frer some stuff upOriginally Posted by homer302
Those are manual door panels, so they if they are the color you need you are good.
Essentially there is no simple conversion from a power window door panel back to a manual. This is due to the fact that the power lock hole is larger than the hole for the window crank. So the only way to make them work is to install something over the front of the panel that fills in the square hole. Same old adage of you can put a round object in a square hole.Bottom line is you can make it work, but they will not look stock or original. I have seen a couple of mods that looked fine, but it all depends on your personal opinion.
Trey
Trey
"I Don't build it hoping for your approval! I built it because it meets mine!"
"I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."
Mustangs Past: Too many to remember!
Current Mustangs:
1969 Mach 1
1979 Pace Car now 5.0/5 speed
1982 GT Stalled RestoModification
1984 SVO Still Waiting Restoration
1986 GT Under going Wide Body Conversion Currently
Current Capris:
1981 Capri Roller
1981 Capri Black Magic Roller Basket Case
1982 Capri RS 5.0/4spd T-top Full Restoration Stalled in TX
1984 Capri RS T-top Roller
1983-84 Gloy Racing Trans Am/IMSA Body Parts
Door panels are SOLD.
Bleed Ford Blue! '84 Grabber Orange SVO, '88 Saleen 1 of 4 w/Automatic, '89 Steeda, '71 DeTomaso Pantera GT5 Wide Body EFI 4.6 DOHC...soon to be a Gen3 Coyote and some Old Ford Muscle w/ BB power. 1.21 Jigawatts!!?? PETRO EXPRESS=CITGO=BOYCOTT!
State of Illinois - Taxation without Representation!
Other tan parts still for sale. PM me if interested. Mike
Bleed Ford Blue! '84 Grabber Orange SVO, '88 Saleen 1 of 4 w/Automatic, '89 Steeda, '71 DeTomaso Pantera GT5 Wide Body EFI 4.6 DOHC...soon to be a Gen3 Coyote and some Old Ford Muscle w/ BB power. 1.21 Jigawatts!!?? PETRO EXPRESS=CITGO=BOYCOTT!
State of Illinois - Taxation without Representation!
Posting Permissions
Reply With Quote
Connect With Us