Bullet swap

[Jerry peachuer]

Can anybody help with specifics on what year bullets do I hunt down to fit a 85 gt with soon to be upgraded 87 n up five lug swap
Offset to not stick out beyond quarter panel is desired and I will be running a drag radial not sure brand yet or size
Thanks in advance

[Ttopcapri]

I may be wrong, but I don't think bullitts will fit over the big bearing cap on those rotors. I ran the pre 2005 bullitts with a '94-'95 spec 5 lug swap (including the SN95 length axles) using fox front control arms with SN95 ball joints. I was very happy with that setup. I tried using the 2005+ bullitts and SN95 arms, the front was OK but the rear wheels tucked in too far.

[Jerry peachuer]

Thanks I had heard theres 2 or 3 different offsets on these I want to keep the color scheme of the car going black/silver not to mention a factory wheel and it will take care of some wheel well gaps
Thanks for the input

[ZephyrEFI]

I only know of 2 different offsets of Bullitts. '01-04 and '05 and up. And I think they do fit over the bearing cap, but you can't run a center cap on the front.

[Jerry peachuer]

Thanks for the input