Close



Results 1 to 7 of 7
  1. #1

    Default 20th Front and rear body moldings

    Are they the same as the 84 or are the specific to the Anny?

  2. #2
    Moderator wraithracing's Avatar
    Join Date
    Jun 2010
    Location
    Grand Junction, CO/RR TX
    Posts
    12,728

    Default

    The front and rear body side moldings that mate up with the front and rear bumpers covers are standard 84 Mustang pieces. These pieces are the same for 79-84 Mustangs. You can also use the rear pieces from 79-82 Mercury Capris.

    The moldings between the wheels are specific to the 84 Anny edition in regards to the Maroon/Red color. The actual trim is the same as the 84-86 SVO IIRC.

    Hope that helps!
    ​Trey

    "I Don't build it hoping for your approval! I built it because it meets mine!"

    "I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."

    Mustangs Past: Too many to remember!
    Current Mustangs:
    1969 Mach 1
    1979 Pace Car now 5.0/5 speed
    1982 GT Ongoing RestoModification
    1984 SVO Awaiting Restoration
    1986 GT Wrecked by PO, but still want to save!

    Current Capris:
    1981 Capri Roller
    1981 Capri Black Magic Roller Basket Case
    1982 Capri RS 5.0/4spd T-top Full Restoration Underway
    1984 Capri RS T-top Roller
    1983-84 Gloy Racing Trans Am/IMSA Body Parts

  3. #3

    Default

    Wraith might prove me wrong (and likely WILL, haha) but I don't believe that is true. I believe the Anniversary moldings are molded out of white material, not black material that is painted white. I know when I had my 20th many moons ago it was my daily driver and those moldings went through all sorts o stuff like nicks and door impacts and I never saw a speck of black or chip in the white. In fact, the white turned yellow constantly.

  4. #4
    Moderator wraithracing's Avatar
    Join Date
    Jun 2010
    Location
    Grand Junction, CO/RR TX
    Posts
    12,728

    Default

    Quote Originally Posted by homer302 View Post
    Wraith might prove me wrong (and likely WILL, haha) but I don't believe that is true. I believe the Anniversary moldings are molded out of white material, not black material that is painted white. I know when I had my 20th many moons ago it was my daily driver and those moldings went through all sorts o stuff like nicks and door impacts and I never saw a speck of black or chip in the white. In fact, the white turned yellow constantly.

    You may be correct in regards to the material the moldings are made of. I have never owned an Anniversary model, so I am not 100% sure. I do know that the shape of the molding next to the bumpers is the same as the standard moldings, so you could make the swap and not have any issues. Obviously you will need to paint to match, but shape and look wise they are interchangeable.

    Same goes for the thin rub strip between the wheels. My understanding is that is the same trim as the SVO, just molded in the red/maroon color rather than grey. Hope that clarifies what I know!

    Honestly it would make sense for Ford to mold them in white since they made so many of that specific model and it saved them from having to paint them.
    ​Trey

    "I Don't build it hoping for your approval! I built it because it meets mine!"

    "I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."

    Mustangs Past: Too many to remember!
    Current Mustangs:
    1969 Mach 1
    1979 Pace Car now 5.0/5 speed
    1982 GT Ongoing RestoModification
    1984 SVO Awaiting Restoration
    1986 GT Wrecked by PO, but still want to save!

    Current Capris:
    1981 Capri Roller
    1981 Capri Black Magic Roller Basket Case
    1982 Capri RS 5.0/4spd T-top Full Restoration Underway
    1984 Capri RS T-top Roller
    1983-84 Gloy Racing Trans Am/IMSA Body Parts

  5. #5

  6. #6

    Default

    hello to all. newer member here with a gt 350 where can I find this elusive side molding?

  7. #7
    Moderator wraithracing's Avatar
    Join Date
    Jun 2010
    Location
    Grand Junction, CO/RR TX
    Posts
    12,728

    Default

    Quote Originally Posted by 605dakota View Post
    hello to all. newer member here with a gt 350 where can I find this elusive side molding?
    None of the GT350 specific side moldings are reproduced at this time. As stated above you can use the standard 79-84 front and rear moldings to replace your moldings as needed, but will require painting to match. The thin molding between the wheels is not available for the GT350 nor the SVO. Your best option at this time would be a similar shaped generic body side molding available from online vendors or your local autobody supply store. Good luck!
    ​Trey

    "I Don't build it hoping for your approval! I built it because it meets mine!"

    "I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."

    Mustangs Past: Too many to remember!
    Current Mustangs:
    1969 Mach 1
    1979 Pace Car now 5.0/5 speed
    1982 GT Ongoing RestoModification
    1984 SVO Awaiting Restoration
    1986 GT Wrecked by PO, but still want to save!

    Current Capris:
    1981 Capri Roller
    1981 Capri Black Magic Roller Basket Case
    1982 Capri RS 5.0/4spd T-top Full Restoration Underway
    1984 Capri RS T-top Roller
    1983-84 Gloy Racing Trans Am/IMSA Body Parts

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •