Close



Page 6 of 6 FirstFirst ... 456
Results 126 to 147 of 147
  1. #126
    FEP Power Member SchoolBoy's Avatar
    Join Date
    Jan 2004
    Location
    Arlington Washington
    Posts
    2,189

    Default

    As long as the weather is good the arlington burger king is the best bet. I'm hoping next year to start organizing 1-2 simple get togethers but time will tell.


    Would a new facebook group make notifying people easier or do not enough people using facebook yet?
    If you blink at the end of the straight away you'll miss the twisties and what fun would that be!
    1982 Capri RS 5.0L
    Suspension Build http://vb.foureyedpride.com/showthre...tion-and-Build
    1985 SVO 2A & leather.
    Motor Build http://vb.foureyedpride.com/showthread.php?t=63505
    Dyno stats and exhaust install http://vb.foureyedpride.com/showthre...Dyno-d-finally
    My FMIC build http://vb.foureyedpride.com/showthre...-amp-D-project
    Electronic boost controller and bypass valve
    http://vb.foureyedpride.com/showthre...d-Bypass-Valve
    Opperation SVO Tunes http://vb.foureyedpride.com/showthre...51#post1148551

  2. #127
    FEP Power Member BLK BRD 88's Avatar
    Join Date
    Dec 2010
    Location
    Next to the Chimney
    Posts
    2,225

    Default

    Is there anything going on up in the northwest in late Oct?
    I am headed up to Spokane on the 12th. Then Sue & I are finally driving our SVO home to Arizona the first week of Nov.
    We plan to do some sightseeing on the way, so we could head to the NW coast if there are any neat activities to attend over there.
    Ron
    I never seem to get the nut that holds the steering wheel fixed

  3. #128
    FEP Power Member SchoolBoy's Avatar
    Join Date
    Jan 2004
    Location
    Arlington Washington
    Posts
    2,189

    Default

    I don't think so, the last big shindig just happened this weekend. But maybe we can set something up if your coming this way. But also a warning that its already started snowing so you may not even be able to get over the pass's by that time.
    If you blink at the end of the straight away you'll miss the twisties and what fun would that be!
    1982 Capri RS 5.0L
    Suspension Build http://vb.foureyedpride.com/showthre...tion-and-Build
    1985 SVO 2A & leather.
    Motor Build http://vb.foureyedpride.com/showthread.php?t=63505
    Dyno stats and exhaust install http://vb.foureyedpride.com/showthre...Dyno-d-finally
    My FMIC build http://vb.foureyedpride.com/showthre...-amp-D-project
    Electronic boost controller and bypass valve
    http://vb.foureyedpride.com/showthre...d-Bypass-Valve
    Opperation SVO Tunes http://vb.foureyedpride.com/showthre...51#post1148551

  4. #129

    Default

    Hello new to the whole forums things. It's going to take me a bit to figure it out. Please bare with me. I'm from Vancouver Washington. I've own 8 different Mustang's but this is the first 4 eye and I love it.

  5. #130
    FEP Power Member SchoolBoy's Avatar
    Join Date
    Jan 2004
    Location
    Arlington Washington
    Posts
    2,189

    Default

    Welcome to the party
    If you blink at the end of the straight away you'll miss the twisties and what fun would that be!
    1982 Capri RS 5.0L
    Suspension Build http://vb.foureyedpride.com/showthre...tion-and-Build
    1985 SVO 2A & leather.
    Motor Build http://vb.foureyedpride.com/showthread.php?t=63505
    Dyno stats and exhaust install http://vb.foureyedpride.com/showthre...Dyno-d-finally
    My FMIC build http://vb.foureyedpride.com/showthre...-amp-D-project
    Electronic boost controller and bypass valve
    http://vb.foureyedpride.com/showthre...d-Bypass-Valve
    Opperation SVO Tunes http://vb.foureyedpride.com/showthre...51#post1148551

  6. #131
    FEP Power Member BLK BRD 88's Avatar
    Join Date
    Dec 2010
    Location
    Next to the Chimney
    Posts
    2,225

    Default

    Quote Originally Posted by SchoolBoy View Post
    I don't think so, the last big shindig just happened this weekend. But maybe we can set something up if your coming this way. But also a warning that its already started snowing so you may not even be able to get over the pass's by that time.
    Whoa, I hadn't even considered that! We tend to forget about weather caused "unpassable" passes down here.
    Ron
    I never seem to get the nut that holds the steering wheel fixed

  7. #132

    Default

    West richland WA

  8. #133
    FEP Power Member SchoolBoy's Avatar
    Join Date
    Jan 2004
    Location
    Arlington Washington
    Posts
    2,189

    Default

    Welcome to forum man!
    If you blink at the end of the straight away you'll miss the twisties and what fun would that be!
    1982 Capri RS 5.0L
    Suspension Build http://vb.foureyedpride.com/showthre...tion-and-Build
    1985 SVO 2A & leather.
    Motor Build http://vb.foureyedpride.com/showthread.php?t=63505
    Dyno stats and exhaust install http://vb.foureyedpride.com/showthre...Dyno-d-finally
    My FMIC build http://vb.foureyedpride.com/showthre...-amp-D-project
    Electronic boost controller and bypass valve
    http://vb.foureyedpride.com/showthre...d-Bypass-Valve
    Opperation SVO Tunes http://vb.foureyedpride.com/showthre...51#post1148551

  9. #134

    Default

    As usual...PNW has very few and far between posts and members.

    I'm in South Seattle area. just finished my 86' coupe project car and I will be terrorizing myself here shortly.

    Been thinking of joining some kinda local club. Don't think the ford drag team is around anymore...��

  10. #135
    FEP Power Member SchoolBoy's Avatar
    Join Date
    Jan 2004
    Location
    Arlington Washington
    Posts
    2,189

    Default

    The ford drag team? Now your showing your age.... And chance you remember a blue/white 57 fairlane with a 428scj?
    If you blink at the end of the straight away you'll miss the twisties and what fun would that be!
    1982 Capri RS 5.0L
    Suspension Build http://vb.foureyedpride.com/showthre...tion-and-Build
    1985 SVO 2A & leather.
    Motor Build http://vb.foureyedpride.com/showthread.php?t=63505
    Dyno stats and exhaust install http://vb.foureyedpride.com/showthre...Dyno-d-finally
    My FMIC build http://vb.foureyedpride.com/showthre...-amp-D-project
    Electronic boost controller and bypass valve
    http://vb.foureyedpride.com/showthre...d-Bypass-Valve
    Opperation SVO Tunes http://vb.foureyedpride.com/showthre...51#post1148551

  11. #136

    Default

    SchoolBoy, are you the person I met at the Monroe "Dream Builders" show?

  12. #137
    FEP Power Member SchoolBoy's Avatar
    Join Date
    Jan 2004
    Location
    Arlington Washington
    Posts
    2,189

    Default

    I didn't actually get to speak with ya, but dad did. We had the blue and white f150.
    If you blink at the end of the straight away you'll miss the twisties and what fun would that be!
    1982 Capri RS 5.0L
    Suspension Build http://vb.foureyedpride.com/showthre...tion-and-Build
    1985 SVO 2A & leather.
    Motor Build http://vb.foureyedpride.com/showthread.php?t=63505
    Dyno stats and exhaust install http://vb.foureyedpride.com/showthre...Dyno-d-finally
    My FMIC build http://vb.foureyedpride.com/showthre...-amp-D-project
    Electronic boost controller and bypass valve
    http://vb.foureyedpride.com/showthre...d-Bypass-Valve
    Opperation SVO Tunes http://vb.foureyedpride.com/showthre...51#post1148551

  13. #138

    Default

    Oh ok, that's my confusion. I'm sorry we weren't able to
    visit, I would have really enjoyed talking to both of you about our cars. Do you have any plans to go to any other shows? Perhaps we can meet again.

  14. #139
    FEP Power Member SchoolBoy's Avatar
    Join Date
    Jan 2004
    Location
    Arlington Washington
    Posts
    2,189

    Default

    No worries! September 8th is the arlington drag strip reunion with 400+ old muscle cars if the weathers good and I hope to get the day off for that. I was planning on the round up but I no longer trust either of my fox's to get there and back. At least not until I can swap the rear axel on the svo.
    If you blink at the end of the straight away you'll miss the twisties and what fun would that be!
    1982 Capri RS 5.0L
    Suspension Build http://vb.foureyedpride.com/showthre...tion-and-Build
    1985 SVO 2A & leather.
    Motor Build http://vb.foureyedpride.com/showthread.php?t=63505
    Dyno stats and exhaust install http://vb.foureyedpride.com/showthre...Dyno-d-finally
    My FMIC build http://vb.foureyedpride.com/showthre...-amp-D-project
    Electronic boost controller and bypass valve
    http://vb.foureyedpride.com/showthre...d-Bypass-Valve
    Opperation SVO Tunes http://vb.foureyedpride.com/showthre...51#post1148551

  15. #140

    Default

    I've already regestered for "Wheels on the Waterfront" in Everett on tnh 8th. Late September, the 23rd, I'll be doing the "Snohomish Classic". Do you ever go to the Burger King cruise in?

  16. #141
    FEP Power Member SchoolBoy's Avatar
    Join Date
    Jan 2004
    Location
    Arlington Washington
    Posts
    2,189

    Default

    The burger king in Arlington?

    I don't have anything set aside for sept 23rd so I'll see if we can make that unless registration is closed already?
    If you blink at the end of the straight away you'll miss the twisties and what fun would that be!
    1982 Capri RS 5.0L
    Suspension Build http://vb.foureyedpride.com/showthre...tion-and-Build
    1985 SVO 2A & leather.
    Motor Build http://vb.foureyedpride.com/showthread.php?t=63505
    Dyno stats and exhaust install http://vb.foureyedpride.com/showthre...Dyno-d-finally
    My FMIC build http://vb.foureyedpride.com/showthre...-amp-D-project
    Electronic boost controller and bypass valve
    http://vb.foureyedpride.com/showthre...d-Bypass-Valve
    Opperation SVO Tunes http://vb.foureyedpride.com/showthre...51#post1148551

  17. #142

    Default

    I think it's still open, also there is "day of" reggestration if I'm not mistaken. So...are you needing some SVO parts to get yours going? Yes the Burger King over by the old Hagens
    Last edited by casper 1999; 07-15-2018 at 11:27 PM.

  18. #143
    FEP Power Member SchoolBoy's Avatar
    Join Date
    Jan 2004
    Location
    Arlington Washington
    Posts
    2,189

    Default

    No back around the 1st of the year I went down to oregon and picked a low mile svo rear end from a friend. I just haven't been able to get it checked and read to install due to other projects in the garage.
    If you blink at the end of the straight away you'll miss the twisties and what fun would that be!
    1982 Capri RS 5.0L
    Suspension Build http://vb.foureyedpride.com/showthre...tion-and-Build
    1985 SVO 2A & leather.
    Motor Build http://vb.foureyedpride.com/showthread.php?t=63505
    Dyno stats and exhaust install http://vb.foureyedpride.com/showthre...Dyno-d-finally
    My FMIC build http://vb.foureyedpride.com/showthre...-amp-D-project
    Electronic boost controller and bypass valve
    http://vb.foureyedpride.com/showthre...d-Bypass-Valve
    Opperation SVO Tunes http://vb.foureyedpride.com/showthre...51#post1148551

  19. #144

    Default

    OK good. I know a guy in Sohomish that put an SVO suspension under an 82 GT that he once offered me so let me. Thought it might be an option for you but it sounds like you have it worked out.

  20. #145
    FEP Power Member SchoolBoy's Avatar
    Join Date
    Jan 2004
    Location
    Arlington Washington
    Posts
    2,189

    Default

    The svo suspension was really good for its day, but sn-95 and 99+cobra irs are game changers in a fox if your looking for upgrades.
    If you blink at the end of the straight away you'll miss the twisties and what fun would that be!
    1982 Capri RS 5.0L
    Suspension Build http://vb.foureyedpride.com/showthre...tion-and-Build
    1985 SVO 2A & leather.
    Motor Build http://vb.foureyedpride.com/showthread.php?t=63505
    Dyno stats and exhaust install http://vb.foureyedpride.com/showthre...Dyno-d-finally
    My FMIC build http://vb.foureyedpride.com/showthre...-amp-D-project
    Electronic boost controller and bypass valve
    http://vb.foureyedpride.com/showthre...d-Bypass-Valve
    Opperation SVO Tunes http://vb.foureyedpride.com/showthre...51#post1148551

  21. #146

    Default

    I do want/need to make suspension upgrades but haven't started collecting parts yet.

  22. #147
    FEP Power Member SchoolBoy's Avatar
    Join Date
    Jan 2004
    Location
    Arlington Washington
    Posts
    2,189

    Default

    Well and if ya can go for rides with people who have done some of the mods your thinking of. I did all steeda parts under my capri, while the svo will have all maximum motorsports parts shorlty. Both cars have koni's all the way around so it will be nice to drive them back to back for comparison. But neither come close to josh's svo with coil overs and a 99 cobra irs.

    Oh, yes we do go to that burger king sometimes!
    Last edited by SchoolBoy; 07-16-2018 at 08:43 AM.
    If you blink at the end of the straight away you'll miss the twisties and what fun would that be!
    1982 Capri RS 5.0L
    Suspension Build http://vb.foureyedpride.com/showthre...tion-and-Build
    1985 SVO 2A & leather.
    Motor Build http://vb.foureyedpride.com/showthread.php?t=63505
    Dyno stats and exhaust install http://vb.foureyedpride.com/showthre...Dyno-d-finally
    My FMIC build http://vb.foureyedpride.com/showthre...-amp-D-project
    Electronic boost controller and bypass valve
    http://vb.foureyedpride.com/showthre...d-Bypass-Valve
    Opperation SVO Tunes http://vb.foureyedpride.com/showthre...51#post1148551

Page 6 of 6 FirstFirst ... 456

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •