The other day I read Chrisperry's sig and realized he lived one town over from me. I shot him a PM to meet up at the local cruise night if he could. It was cool to get the cars together and shoot some pics:
The other day I read Chrisperry's sig and realized he lived one town over from me. I shot him a PM to meet up at the local cruise night if he could. It was cool to get the cars together and shoot some pics:
- Ed
'85 Capri RS - "1BADMERC" -'00 GT40P motor & heads, Edelbrock RPM/Holley 650, E303 cam, full length BBK ceramics,5spd/flowmaster 2-chambers/373's
5 Lug conversion, cobra discs on all four corners, 1" drop
My cowl hood thread:
http://vb.foureyedpride.com/showthread.php?t=131334
Thanks for sharing nice pics.
Dan & Paula
http://i658.photobucket.com/albums/u.../Photo0062.jpg
2008 Cougar restoration (pics)
http://s658.photobucket.com/albums/u...ics/?start=all
Nice pictures. I've driven through LakeView a handful of times. Very nice area!
1979 Indy Pace Car Mustang 302 / 5spd
1982 Mustang GT T-Top 302 / 4spd
1986 SVO Mustang - 1C
Thanks for posting and representing us!
1979 Mustang Cobra 5.0
2P Red and 1C Black
Stock never goes out of style
MCA #70281 - 79-93 MCA Concours Judge
Proverbs 3:5-6
My Mustang Story
http://vb.foureyedpride.com/showthre...71#post1688371
- Ed
'85 Capri RS - "1BADMERC" -'00 GT40P motor & heads, Edelbrock RPM/Holley 650, E303 cam, full length BBK ceramics,5spd/flowmaster 2-chambers/373's
5 Lug conversion, cobra discs on all four corners, 1" drop
My cowl hood thread:
http://vb.foureyedpride.com/showthread.php?t=131334
Good stuff- thank for the pictures. Those are the first ten-holes I have seen on my era Mustang (I live a sheltered life) and I must say I really like them. Both cars are great, and once again I have Capri envy.
1983 Mustang G.T. No-option stripper- I like strippers.
5.0, GT40P heads, Comp Cams XE270HR-12 on 1.6 rockers, TFI spring kit, Weiand 174 blower, Holley 750 mechanical secondarys, Mishimoto radiator, Edelbrock street performer mechanical pump, BBK shortys, T-5 conversion, 8.8 rear, 3.73 gears, carbon fiber clutches, SS Machine lowers, Maximum Motorsport XL subframes, "B" springs.
Good looking pair.
Bob in Lebanon, TN
79 original owner six cylinder coupe
MCA Gold Card judge for 3rd Generation cars
Awesome thanks for posting. Such a rare sight to see 4 eyes side by side.
1985 5.0 Coupe - will eventually be hated by Ford purists
i like the ten holes on my car, but i really wish i had the original wheels to go with it. but yea. we were the cool section of that cruise that night.
Chris Perry
1983 Mustang GT 5.0
1984 Thunderbird TC
Both cars are sweet but I LOVE your Capri!
How far are you from Long Island? lol We need more 4eyes at the Fox-a-Que next year!
=Mike=
86 AscMcLaren Capri #026/114 | 11.2@123
86 Mustang SVO - 9L | 14.0@97 | 19psi
My Website (New and Improved)
Custom Wheel Center Caps, Vinyl Decals Racing #'s etc.
Cool pics!
Funny you mention "the other Lakeview".... bc I cruised around Lakeview (the LI one) one weekend a few years ago looking for your car, hoping I'd see it. I grew up a few towns over and would have thought I'd have know it and also thought maybe it was a Capri from Rockville Centre I knew of...
then I remember seeing you post something once that corrected the whereabouts for me.
Yes, wish you were down on LI, then you could come to the Fox-a-que. Even still you are more than welcome for next year!
I'd love to come to Long Island for the BBQ .....but I have City - phobia. Don't know If I'd like to drive through NYC to get there. You guys might have to meet me on the eastern side and escort me through! We could have a Four eye convoy and you could blame it on me for being a wuss!
- Ed
'85 Capri RS - "1BADMERC" -'00 GT40P motor & heads, Edelbrock RPM/Holley 650, E303 cam, full length BBK ceramics,5spd/flowmaster 2-chambers/373's
5 Lug conversion, cobra discs on all four corners, 1" drop
My cowl hood thread:
http://vb.foureyedpride.com/showthread.php?t=131334
Haha! it's ok. The $300 craigslist find was worth it just to make you guys happy! They are hammered though, the dude that had them before me must've played ping pong off of the curbs!
- Ed
'85 Capri RS - "1BADMERC" -'00 GT40P motor & heads, Edelbrock RPM/Holley 650, E303 cam, full length BBK ceramics,5spd/flowmaster 2-chambers/373's
5 Lug conversion, cobra discs on all four corners, 1" drop
My cowl hood thread:
http://vb.foureyedpride.com/showthread.php?t=131334
Silver and red, a very nice combo! Thanks for posting
That '83 is one of the Cleanest I've seen in a while. These pics don't do it justice. C'mon chris, put some more up.
- Ed
'85 Capri RS - "1BADMERC" -'00 GT40P motor & heads, Edelbrock RPM/Holley 650, E303 cam, full length BBK ceramics,5spd/flowmaster 2-chambers/373's
5 Lug conversion, cobra discs on all four corners, 1" drop
My cowl hood thread:
http://vb.foureyedpride.com/showthread.php?t=131334
1980 Cobra 8W Chamois Glow
302 w/Performer Intake & Cam, T5, Hooker Super Comp Shorties, BBK Off Road X-pipe, Dynomax Super Turbo Cat-Back
BBK Progressive springs, Koni SA Shocks
Ask me about interior panel resto, PM me if you have Recaro parts.
Kenny
(son of 347togo)
Click here for my Interior Resto guide
Build Thread
Turnin', Burnin', and Learnin'
They say Euromax design on the Centercap and they are 17x9's. But they say made in china on them which gave me a bit of heartburn but I didnt buy them new. Are the Saleen ones made in the usa? I bought them off a guy who bought a '02 with them on there and didnt like them so he sold them. Like I said thought the lips (the fronts are really bad) are pretty chewed up. The front tires are 235/45/17's Which I think are too small for a 17x9 rim and are stretched on there leaving alot of rim lip exposed.
This is like the best one:
Last edited by edman1000; 02-25-2013 at 09:47 PM.
- Ed
'85 Capri RS - "1BADMERC" -'00 GT40P motor & heads, Edelbrock RPM/Holley 650, E303 cam, full length BBK ceramics,5spd/flowmaster 2-chambers/373's
5 Lug conversion, cobra discs on all four corners, 1" drop
My cowl hood thread:
http://vb.foureyedpride.com/showthread.php?t=131334
Yeah, those are Euromax 612, But I think Saleen may have gotten them made in the US, my dad has 18x9s on his '08 GT, he bought them off of ebay for $375 for the set, on clearance from Saleen. Yours are they gray version that Euromax sold, but they're no longer made.
Not my dads car, but here is what his look like:
1980 Cobra 8W Chamois Glow
302 w/Performer Intake & Cam, T5, Hooker Super Comp Shorties, BBK Off Road X-pipe, Dynomax Super Turbo Cat-Back
BBK Progressive springs, Koni SA Shocks
Ask me about interior panel resto, PM me if you have Recaro parts.
Kenny
(son of 347togo)
Click here for my Interior Resto guide
Build Thread
Turnin', Burnin', and Learnin'
Crap! Now I got to measure them up to find out backspacing and everything. I know they came off a new Edge car but I'm unsure of what they measure. They fit Great actually.
- Ed
'85 Capri RS - "1BADMERC" -'00 GT40P motor & heads, Edelbrock RPM/Holley 650, E303 cam, full length BBK ceramics,5spd/flowmaster 2-chambers/373's
5 Lug conversion, cobra discs on all four corners, 1" drop
My cowl hood thread:
http://vb.foureyedpride.com/showthread.php?t=131334
Connect With Us