I posted about these question about my 1983 Mexican Mustang in the Mexican Mustang section, but got no replies. Maybe it does not get a lot of visitors? Search here and on the Web did not produce the answers. Apologies for posting twice. TIA for any useful info on these issues!
PROBLEM #1: The seats have "halo" headrests with webbing in the middle. They are attached with a single flat steel bar that goes into the top of the seat back. One of them will slide out about 1/4 inch. The other won't move at all.
I need to take the headrests off to install slipcovers, but they won't budge. Other forums have said there is a lever or button inside that must be pressed or lifted. I found nothing like this in my seats. Unzipped the bottom of one and reached up, but run into stitching that holds the fabric to the foam on both front and back, so can't reach all the way up. Tried silicone spray on the headrest bar, but still completely stuck.
PROBLEM #2: I have a 4-spoke wheel exactly like this one:
http://i451.photobucket.com/albums/q...ng4sale018.jpg.
The horn button is off and in two pieces. No sign of a spring or anything to make the horn circuit work. Where is the horn on these wheels, what pieces do I need, and how to I get this back together?
Connect With Us