Does anyone have any 86 V8 convertible specific P/W wiring schematics ?
Im looking for someone that has vert (or maybe ltd since it had 4 power windows) specific schematic knowledge.
Im in the process of swapping a 86 sefi dash and headlight harness into an 84 gt convertible.
I want to wire this car like it would have been in 86.
The 84 power window harness got its power from a breaker on the passenger mounted starter relay(constant +12v)B/W wire. It then runs to another relay mounted behind the dash on the driver side(safety relay???) and changes to blue which runs to the power window master switch. That relay is switched buy a wire that comes off the fuse box (I believe #14)which is +12v with the key on. This switched wire is the same wire that the 86 uses for power windows but without a relay inline.
It here any reason I couldn't eliminate the safety relay and run the wire from the fuse box directly to the Blue power wire that goes directly to the master window switch? Another option would be to use #14 as the trigger circuit as the 84 used,and use the B/w constant +12v power lock wire coming off the 86 fuse block for the power going to the relay. This car doesn't have power locks,so I'm not worried about losing the circuit.
If I were using the 5.0 sefi engine harness,it has a bullet connector that I believe is used specifically for the constant +12v that comes directly from the starter relay for the power windows. This wire isn't used for non-convertible sefi cars. This car is going to have a carburetor on it for the time being until I collect some more efi parts to do the swap.
I have already combed the 84/86 wiring schematics,and the 86 evtm and it really doesn't show much on the convertible wiring.
Any help will be appreciated.
Chris
Connect With Us