PDA

View Full Version : FMR Exclusive Parts List


foxmustangrestoration
03-06-2008, 03:32 PM
FourEyedPride is the first to get FMR’s list of exclusive Fox body parts! All FourEyedPride members always get 10% off of all purchases buy using promotion code FEP! The followings parts can only be found at FMR!


Fox Mustang Restoration now has the long awaited 81-88 T-top and 83-88 convertible front and rear run channels. The front run channels are made from Original Ford tooling and are the last update Ford made on these pieces. The original Ford part number for these is E8ZZ-7620564-A. Retail is $159.99 for the pair. FEP members as always, get their 10% discount. http://www.foxmustangrestoration.com/?p=vp&id=848

The rear run channels/end caps are reproductions. These are $45.99 for the pair. http://www.foxmustangrestoration.com/?p=vp&id=851

The run channels are also available in a four piece set for $199.99. http://www.foxmustangrestoration.com/?p=vp&id=852

Also exclusive to FMR is the sunroof nut bracket for the latch. This is the rectangular bar as seen from the outside of the sunroof. This is the piece that has the two threaded holes for the bolts that hold the sunroof latch to the glass. This piece is made from solid steel and is powder coated black. The price is $34.99. http://www.foxmustangrestoration.com/?p=vp&id=854

We are also developing a complete sunroof hardware kit. Coming in Fall of ’08.

Now available is the 1985 Carbureted 5-speed alternator wiring harness. This is the complete harness including the choke wire. Priced at $64.99. http://www.foxmustangrestoration.com/?p=vp&id=840

Repair your old door panels with FMR’s door panel repair boards. These are exact copies of the original backing boards used from 1981-86. As long as the vinyl is good on your door panels they can be rebuilt to look like new. Door panel boards are $44.99 for the pair with installation hardware.

Alos available is the seals that go on the left and right of the radiator. These attach to the radiator support and cover the holes between the radiator and the support. This kit includes the left and right seal with attachment hardware. http://www.foxmustangrestoration.com/?p=vp&id=855

Also coming soon, Complete 1979-93 Coupe rear package trays. Most colors will be available and these will be the most accurate reproduction on the market with provisions for all of the different seatbelt and speaker configurations.

Any suggestions for parts that need to be reproduced are welcome. Just send them to matt@foxmustangrestoration.com .

www.foxresto.com will have a new look on March 24th.

Anthony
03-06-2008, 03:39 PM
any idea of the wait for the deck board? i was going to order the door boards but will wait to save on shipping if its not too long

foxmustangrestoration
03-06-2008, 04:11 PM
The package tray will be ready this month!!

dburdyshaw
03-10-2008, 07:46 PM
Is the package tray going to be available in chamois (caramel)?

letsgosteelers
08-06-2008, 06:12 AM
I saw that you have the hold down bolt and clip but do you have the actual hold down piece itself? the wedge that the bolt goes through to secure the battery to the tray?

tks!

foxmustangrestoration
08-07-2008, 03:55 PM
If you are referring to the 79-86 then not yet. We now have the battery trays available.

85GTTops
09-04-2008, 07:19 PM
Matt, as you and I both want these on our Christmas list:

I think the most important restoration piece for just about every four eye (aside from SVO's) would be to reproduce or restore the steering wheels for models, especially for 84-86 model years. That includes the rubber 3 spoke and rubber 2 spoke w/cruise. I think with an injection mold process both can be done, provided there are donors (there are quite a few wheels on eBay for cheap already).

Second to that are floor mats. If those can be reproduced with the correct backing (ribbed with correct Ford stamp) for 79-96 model years, we're in business. There aren't too many reproduction floor mats out there, so imagine the concours appeal. I found an upholstery shop that can re-carpet floor mats provided the backing is in tact, but that seems to be less than ideal.

84NAVYCAT
10-08-2008, 03:27 PM
Are you guys going to make the 1986 side bumpers that go between the doors and the back wheels that say RS just like the GT ones?

thanks

joe