turbobird
10-03-2007, 07:20 PM
Okay this has been my project for over 4 years now and I'm ready to sell and do something new. Here are all the parts I can think of off the top of my head. Car is not running at the
moment but all it needs is injectors and exhaust to run again.
-1991 302 80,000 miles with gt40p heads with 1.94 1.80 valves, stiffer springs, cleaned up and gasket matched intake and exhaust ports, and comp 1.7 roller rockers. Have about 5,000 miles on them. I bought off of ebay for $600
Twin turbo kit that is sold on ebay for mustangs. Headers are mocked up and turbo's. Cold side and intercooler are mocked up. Still needs finished but i have 90% of the parts to do it. Oil feed lines, oil drain lines, gaskets, bolts are all included. I just haven't gotten this far on the build yet. Most parts are XS turbo brand. Also has two blow off valves in boxes for the kit.
- E303 cam and new lifters put in about 100 miles before parking car.
-Anderson Motorsports Pms tuner. New style with 3-bar Map sensor
- Trickflow streetheat intake Silver in color. Was put on car for about 50 miles before it was garaged to start twin turbo kit.
- t-5 same mileage as engine with a mac shifter on it. Stock other than shifter.
- custom aluminum driveshaft from PST
- 95 mustang 8.8 rear built. 4.10 Ford motorsports gears, welded tubes, rear disc brakes, Strange s/s 31 spline axles, powertrax no-slip traction system, Ford motorsports rear aluminum cover. 3 inch arp wheel studs.
-Steeda upper fixed aluminum control arms. Billet aluminum lowers with weightjackers. New spring isolaters.
-255 bbk intank pump
- Lincoln lsc front rotors.
-2004 mustang 5 spoke wheels with stock tires 70% tread on them.
-New windshield in 2005.
-Car has a 1991 mustang dash and is set up for console . Interior is not finished. It is blue but most is taken apart to go black. I have brand new in box Acc black carpet. Has mustang 4 cyl bucket front seats that are not in great shape and stock rear seat that needs recovered.
- Body needs work and paint but is not rusted out anywhere. Was a Wyoming car most of it's life. Has homemade cowl hood but I would replace with flat one if I were you. Also has vinyl top that is in decent shape but was white and is starting to yellow. Car is sky blue in color.
I'm sure I'm missing something. Questions just Pm me. The price is $6000 firm or $4500 without turbo kit.
- Pics are in my album-
moment but all it needs is injectors and exhaust to run again.
-1991 302 80,000 miles with gt40p heads with 1.94 1.80 valves, stiffer springs, cleaned up and gasket matched intake and exhaust ports, and comp 1.7 roller rockers. Have about 5,000 miles on them. I bought off of ebay for $600
Twin turbo kit that is sold on ebay for mustangs. Headers are mocked up and turbo's. Cold side and intercooler are mocked up. Still needs finished but i have 90% of the parts to do it. Oil feed lines, oil drain lines, gaskets, bolts are all included. I just haven't gotten this far on the build yet. Most parts are XS turbo brand. Also has two blow off valves in boxes for the kit.
- E303 cam and new lifters put in about 100 miles before parking car.
-Anderson Motorsports Pms tuner. New style with 3-bar Map sensor
- Trickflow streetheat intake Silver in color. Was put on car for about 50 miles before it was garaged to start twin turbo kit.
- t-5 same mileage as engine with a mac shifter on it. Stock other than shifter.
- custom aluminum driveshaft from PST
- 95 mustang 8.8 rear built. 4.10 Ford motorsports gears, welded tubes, rear disc brakes, Strange s/s 31 spline axles, powertrax no-slip traction system, Ford motorsports rear aluminum cover. 3 inch arp wheel studs.
-Steeda upper fixed aluminum control arms. Billet aluminum lowers with weightjackers. New spring isolaters.
-255 bbk intank pump
- Lincoln lsc front rotors.
-2004 mustang 5 spoke wheels with stock tires 70% tread on them.
-New windshield in 2005.
-Car has a 1991 mustang dash and is set up for console . Interior is not finished. It is blue but most is taken apart to go black. I have brand new in box Acc black carpet. Has mustang 4 cyl bucket front seats that are not in great shape and stock rear seat that needs recovered.
- Body needs work and paint but is not rusted out anywhere. Was a Wyoming car most of it's life. Has homemade cowl hood but I would replace with flat one if I were you. Also has vinyl top that is in decent shape but was white and is starting to yellow. Car is sky blue in color.
I'm sure I'm missing something. Questions just Pm me. The price is $6000 firm or $4500 without turbo kit.
- Pics are in my album-