cracked floor pan [Archive] - Four Eyed Forums

mb84gt

08-15-2005, 02:09 PM

Hey guys, i was wondering what the correct way to fix a cracked floor pan is? How much should it cost to have done the correct way?

mcb82gt

08-15-2005, 02:31 PM

Sell it ASAP

mb84gt

08-15-2005, 03:09 PM

Ha ha, keep it up.

mutantcapri1979

08-15-2005, 09:04 PM

if it rotted replace them w/ pans from latemodelresto or mustangsunlimited. my 79 is cracke but not that bad. I bought a mig welder and i am weldin up the cracks this weekend and putting subs on

mb84gt

08-16-2005, 07:44 AM

Thank you for you response.

cmccarthy

08-16-2005, 09:08 AM

I had mine welded at a local body shop. It cured my seat lean and an annoying squeak. The key was to place a 12x12 square of wood on a floor jack and use it to support the floor from underneath while welding. I put just enough pressure on the floor with the jack to close up the crack, and then welded. Problem solved.