new valves in e7s

[Lookn4theend]

will these fit into my e7 heads?
1.840" X 5.070" X .395" Tip
1.540" X 5.070" X .395" Tip i can get a brand new set for free. my heads are getting a valve job and resurface anyways be4 they go into my 85. will these work?

[frankiesaysrelax]

My E7s have 1.90 / 1.60s. They are PowerHeads, and I don't know what was involved in getting them in there. New seats at the very least.

[richpet]

I have 194/160 in mine. They are very close to touching but work great.

[306gt]

They will work fine, Just have your machinist cut in the seats so you will have a installed valve height of 2.157"-2.187" and you will be fine. The overall length of the valve is the same as the stock ones. Just open up the seats and bowl's with multiple cuts 30-45-60-75 degree angles or even radius the exhaust seats. The installed valve height I listed is the factory spec. If the machinist sets them up at this spec it will keep the valvetrain geometry in check provided the heads were not milled in excess.