Transmission mount stud size?????

[ahgrafx]

I've asked this before but noone knew maybe someone else will. I'm still driving without the nuts. It's the studs that come out of the rubber mount that then go through the crossmember.
thanks guys

[noslofiveoh]

imm...for some reason the size that pops into my head is 7/16"

do u maybe have a "magic bolt box" ? maybe find something in there that threads on and then just go buy 2 new ones

[ahgrafx]

imm...for some reason the size that pops into my head is 7/16"

do u maybe have a "magic bolt box" ? maybe find something in there that threads on and then just go buy 2 new ones

I wish i did, I lost them when i rebuilt my engine :( There pretty big. I wish someone could just run out and put a socket around it and let me know.

[noslofiveoh]

ya know...i was just under my car the other night..lol and theyre maybe 9/16" or 5/8" on the socket side...i thought u were talking about the stud size...they can vary on the socket side depending on how thick the nut is... couldn't u just take the trans mount off and go and match it up? or is that ur DD?

[bigblock79]

For some reason the ones on this c-4 i bought are metric. the original c-4 bolts on my car were standard. It took a couple of trips to the hardware store to get it right.

I just buy a couple of everything that looks close and return the incorrect ones. Or just go to your local ford dealer and they should be able to get them for you.

[noslofiveoh]

i too buy multiple sizes if i'm not sure, but i don't retun them...i put them in my "magic" bolt box...it has saved me numerous trips to the store

[ahgrafx]

that's probably what im going to have to do

[ahgrafx]

any hardware store should have these right?

[noslofiveoh]

yeah they should..u usually go to lowes or home depot..they have a prety good selection